Q LOGIC CORPORATION

QLA 1042

Card Type                  Hard drive controller card
Chip Set                   Unidentified
Maximum Onboard Memory     Unidentified
Hard Drives supported      Up to 30 SCSI-2 Fast/Wide devices or 6 Ultra
                           SCSI devices
Floppy drives supported    None
Data Bus                   32-bit PCI

[Image]

                                CONNECTIONS

         Function             Label            Function            Label

  68-pin SCSI connector -      J1      68-pin SCSI connector -      J3
  external                             internal

  68-pin SCSI connector -      J2      LED connector                J10
  external

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   Factory configured - do not alter           J8          Closed
      (BIOS bank)

  »   Factory configured - do not alter           J9          Closed
      (BIOS bank)

                      CHANNEL 1 TERMINATION SELECTION

          Setting                     J6                      J7

  High termination enabled          Closed                   Open

    Termination disabled              N/A                   Closed

  Note: Channel 1 uses connectors J1 & J3.

                      CHANNEL 2 TERMINATION SELECTION

          Setting                     J4                      J5

  High termination enabled          Closed                   Open

    Termination disabled              N/A                   Closed

  Note: Channel 2 uses connector J2.